TTU-A with long shaft stirrer and cooling coil


TTU devices are thermostatic heads that can serve as ...

Producer
Tamson

Description

TTU devices are thermostatic heads that can serve as replacement unit or a “plug and play” unit to heat a bath or application. This TTU-A version with long shaft stirrer and cooling coil offers excellent temperature uniformity in deep baths.

The TTU-A is used for precise temperature control and offers high reliability under rough circumstances. The TTU-A is made of stainless steel and is an excellent solution to control the temperature in a custom made bath. The system can offer an extremely stable working temperature of ± 0.01°C. The exact temperature stability that can be achieved depends on the bath that is used. The set point temperature can be set in steps of 0.01°C. The temperature is displayed in 0.01°C. This two decimal-readout also is available from the RS232 and the free Tamcom software.


The TTU-A can be operated from ambient up to 200°C (41°F..392°F). Due to the “self-heating” of the stirring mechanism, the minimum temperature lies approximately 5°C above the ambient temperature. When using the standard built-in cooling coil the minimum operating temperature lies approximately ±5°C above the temperature of the cooling liquid circulating inside the cooling coil. Minimum working temperature when using external cooling lies around 10°C.
The immersion circulator conforms to CE regulation and is equipped with a mechanical resettable safety thermostat and a float to ensure a correct level of the bath fluid.

Features and Benefits

  • Completely made from stainless steel
  • Easy to read display
  • RS232 communication
  • Plug and play unit 
  • Fluid level detection
150 150 TTU-A with long shaft stirrer and cooling coil 2021-12-28