NOVINKY

OptiFlash- Přesné,rychlé a bezpečné analýzy bodu vzplanutí

11.08.2014

JFTOT® OptiFlash - Pensky Martens je novým přístrojem pro stanovení bodu vzplanutí v uzavřeném kelímku...

JFTOT IV - Nový přístroj od společnosti PAC

15.10.2013

JFTOT® 230 MARK IV je novým přístrojem pro stanovení oxidační a termické stability vycházející z celosvětově uznávané řady přístrojů JFTOT..

Nový Reformulyzer M4 - Nejrychlejší a nejvíce flexibilní analyzátor na trhu

10.09.2013

Reformulyzer M4 dokáže provést celou skupinu analýz benzínů a benzínových směsí pomocí multidimensionální plynové chromatografie..

Lubricity

PCS: ABS - Automated BOCLE System

The ABS is a microprocessor-controlled Ball-on-Cylinder wear test system which provides a fast, repeatable assessment of the performance of jet fuels that fully conforms to the ASTM D5001 test method for “Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator”. 


Detailní informace >>


PCS: HFRR

HFRR
The High Frequency Reciprocating Rig (HFRR) is a microprocessor-controlled reciprocating friction and wear test system which provides a fast, repeatable assessment of the performance of fuels and lubricants. It is particularly suitable for wear testing relatively poor lubricants such as diesel fuels and for boundary friction measurements of engine oils, greases and other compounds.  


Detailní informace >>


PCS: ABSSL - Automated BOCLE System Scuffing Load

The PCS Instruments ABSSL System (Automated BOCLE System Scuffing Load) is a fully automatic laboratory instrument for carrying out lubricity testing of diesel (middle distillate) fuel.


Detailní informace >>


PCS: EHD - Elasto Hydrodynamic Lubriction

The EHD2 Ultra Thin Film Measurement System is the latest evolution of the successful EHD instrument which to date has sold over 50 systems worldwide. The instrument measures the lubricant film thickness properties in the contact formed between a ¾“ (19.05mm) diameter steel ball and a rotating glass disk by optical interferometry 


Detailní informace >>


PCS: MPR - Souprava Mikro-Pitting

Micropitting and macropitting are rolling contact fatigue failure mechanisms which occur in cyclically loaded machine components such as gears, cams and rolling element bearings. Micropitting is a fatigue phenomenon resulting in microscopic pits forming on the surfaces in contact. These are produced by asperity scale plastic flow caused by repeated cyclic contact stresses. The pits are typically less than 100 microns wide.

 

 


Detailní informace >>


PCS: MTM - Mini Traction Machine

The MTM2 is the latest evolution of the successful MTM instrument which to date has sold over 50 systems worldwide. It is a flexible general purpose instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions.  


Detailní informace >>